| Article number | 3220.0135 |
|---|---|
| Catalog number | MLGP 7-HNBR |
| Outlet pressure max. | 70 bar (1,015 psi) |
| Pressure ratio | 1:7 |
| Number of air drive pistons | 1 |
| Article number | 3220.0135 |
|---|---|
| Catalog number | MLGP 7-HNBR |
| Outlet pressure max. | 70 bar (1,015 psi) |
| Pressure ratio | 1:7 |
| Number of air drive pistons | 1 |
| Mode of action | Single-acting |
| Gas inlet pressure min. | -0,8 bar (-11,6 psi) |
| Min. Drive pressure | 1 bar |
| Max. Drive pressure | 10 bar |
| Air drive inlet PL | 6B - 3/8 BSPP with seal outside |
| Inlet A | 8B - 1/2 BSPP with seal outside |
| Outlet B | 8B - 1/2 BSPP with seal outside |
| Seal kit (inlet/outlet) | HNBR - hydrogenated nitrile rubber, good temperature behavior at -40°C to 140°C, media compatibility: low, abrasion resistant |
| Flame arrester | Standard |
| Version | Standard |
| Air drive section modification | Standard |
| Temperature option | Standard |
| ATEX Directive | II 3G Ex h IIC T3 Gc |
| Dimensions (L x W x H) approx. | 254 x 100 x 84 mm |
| Weight approx. | 3.6 kg |
Unfortunately, there are currently no files available for the selected article number. Please use the contact form to send a request or ask for more information.
If you need additional spare/wearing parts for the selected product or products already in use, please contact us.
 |
Seal kit spoolArticle number 3610.5333 Recommended Quantity 1 Schematic VP10.18.393 |
|---|---|
|
Seal kit airArticle number 3610.5639 Recommended Quantity 1 Schematic VP10.04.50.01 |
|
Seal kit HPArticle number 3610.5374 Recommended Quantity 1 Schematic VP10.04.51 |
Do you have questions about our product and service portfolio or would you like personal advice?
Contact now